Hey #cleaningarmy, we are temporarily sold out on this shipment, but have more stock arriving soon! Get your pre-order in now before we sell out again.
Pre-orders start shipping early May 2021.
Thanks so much for your support of our small business!
The original AquaBLADE Cleaning Kit recommended by @GOCLEANCO!
“Every single one of my staff @GOCLEANCO carries the AquaBLADE, it is the fastest, most efficient way to clean windows.” - Sarah, General of GoCleanCo
Purchase now and get a BONUS microfiber washer cloth!
- Cleans smooth surfaces with ease.
- Grabs and dries while it cleans.
- No more dripping as you wash. No mess!
AquaBLADE is a quality cleaning tool made in Italy. It is designed to dry smooth wet surfaces without effort and is safe to use on all types of material. AquaBLADE consists of a silicone wiper blade with a water conveyance channel/drip tray on one side. It provides quick, easy, residue, and streak-free cleaning, allowing your surfaces to dry almost immediately! This set also comes with a handy microfiber washer and a long pole to reach those high windows and hard-to-reach areas.
Check out our video Highlights on our Instagram page!
The AquaBLADE can be used on shower doors/cubicles, windows, tiles, glass-topped surfaces, glass doors, laminate, mirrors, cars, boats, RVs, and much more.
Your BONUS set includes:
- 1 x Large 12" AquaBLADE Accessory (Reg. $31.99)
- 1 x Small 8" AquaBLADE Accessory (Reg. $22.99)
- 1 x Short Handle (Included with AquaBLADE above)
- 1 x Microfiber Washer + Bonus Washer Cloth (Reg. $23.98)
- 1 x Pole: not extended 31 ¼ inches or 79.5 cm, extended 56 ¼ inches or 143 cm. (Reg $11.99)
- Total Value: $90.95 + FREE* Shipping! *Alaska, Hawaii, PR, US Virgin Islands not included.
Watch a how-to video below to get the most out of your AquaBLADE...
And for more insight, check out our reviews below.
Product Dimensions (Inches):
Made in Italy: Large blade 12 x 4.75 x 2.25, Smaller blade 8 x 4.5 x 2.25, Handle (quantity 1) 13.75 x 1 x 1, Pole not extended 31 ¼ inches or 79.5 cm, extended 56 ¼ inches or 143 cm. Extension pole component only made in China. Accessories various sizes.
Product Weight (lbs):
.46 to 2
2 year limited against manufacturer's defects.
Care & FAQ's
What is the best solution to use to clean my windows?
We recommend no more than three drops of dish liquid and about 1 TBSP of vinegar to 1 QT of water. This solution offers cost-effective and brilliant shine results. Watch the How-to video below for a more detailed explanation.
Will my AquaBLADE fit on any broom handle or extension pole?
As of approximately March 2020, our shipment of AquaBLADEs now fits both European and North American threading for extension poles. It seems that the cleaner head does not thread completely to the end of the threading on a North American pole (you still see a bit of threading but that is fine). Prior to this, it was only compatible with European threading.
I cannot seem to tighten my AquaBLADE pole (or keep it extended).
Have you tried turning the yellow part of the pole in opposite directions for several rotations until it tightens? It tightens like a hiking pole or painter’s pole. When held upright, the top (thicker) section of the pole needs to be turned clockwise, like the “righty-tighty, lefty-loosey” saying.
Sometimes AquaBLADE users turn the blue part in the middle of the pole rather than just turning the yellow poles. The blue section does not have a role in tightening.
Poles can be like a ballpoint pen sometimes, so the internal mechanism might need a slight adjustment. Hold the pole upright (with the threaded end upwards) and just tap the pole on the floor a couple of times.
One other tip is when the pole is fully extended, there is not enough threading to tighten the unit. Simply pull the pole all the way out and re-insert by about 1/2 inch to ensure the threading is exposed inside the pole. If you are still having challenges, please call us toll-free at 1-800-668-1966 during business hours or email us.
I am getting streaks. Am I doing something wrong?
If there is a streak of water left behind when you swipe the AquaBLADE down your window, most likely there is debris, dust, or dirt on the silicone edge of the AquaBLADE. Just clean the edge of the blade with soapy water and a microfiber cloth, and the streak should no longer occur.
As well, you need to push a little, “Bend the blade” when drawing the Aquablade down your window. This will help with getting the window or mirror properly cleaned and will also eliminate squeaking noises.